Sublimation Transfer Mug 95 mm x 210 mm

Sublimation transfer for mugs, 95 x 210 mm

This format is prepared for the wrap of a standard 330 ml sublimation mug. The transfer is supplied mirrored and you apply it to a coated sublimation mug using a mug press or a suitable oven system. For runs, you will find the tiered prices right here on the product.

• File size 95 x 210 mm
• Supplied centred on a 100 x 240 mm transfer sheet
• CMYK print without white
• Minimum order quantity: one piece
• For use on suitable coated sublimation mugs
• Finished mugs are best washed by hand

Setting up print files for the mug

Set up your file at exactly 95 x 210 mm. We place your design centred on a 100 x 240 mm transfer sheet. Use 300 dpi and ISO Coated v2 300% (ECI) if possible. Set up pure black as C 0, M 0, Y 0, K 100. Set up the file unmirrored; we mirror it at our end during output. Anything that stays white in the file is not printed, so the surface of the mug will remain visible in those areas.

Before exporting, take another look at how the design reads, where it sits in relation to the handle and the drinking side, and how much ink is applied. If the total ink coverage is too high, the transfer takes longer to dry and may smudge.

How to put together your mug transfers

If you are unsure about your files, add the Pro File Check and then upload your single-page PDF or PNG files. If you have several mug designs, you can drag and drop several files and enter the quantity for each file separately. Finally, check your selection and add it to the basket.

The maximum file size is 500 MB. If a PDF has several pages, the upload refuses it, and each page then goes into a separate file. If a file error is found, you will receive an email from us and can then send us the corrected single page by email or WeTransfer, with your order number.