DTF Transfer Blockout - Single Design
€37.80 per m²
Your unit price depends on the size of your design. Example: €0.38 for a design 100 × 100 mm.
Available, delivery time: 2-5 working days
Your designs come as a gang sheet, not cut out individually. They sit side by side on the roll; you do the cutting yourself.
- Delivered as one continuous sheet, the designs are not cut individually.
- You upload one design and choose the quantity.
- You are charged for the design area multiplied by the quantity.
Colour-accurate printing instead of guessing on screen
Your screen glows, a printed textile does not. A monitor mixes colour from light, whereas a DTF transfer mixes it from pigment that sits on the fabric. That is exactly why a shade on the shirt almost always looks different from how it looked on the computer. What you get here is therefore not a screen sample or a paper sample, but a real printed DTF transfer.
The colour chart contains 964 colour swatches, each labelled with its CMYK value underneath. This means colour matching happens before production, including any adjustments, rather than as a correction after the first proof.
The colour chart is delivered on a roll, printed as a DTF transfer.
Colour charts are excluded from complaints. This does not apply to defective colour charts.
Sample Pack All in One: test DTF, UV DTF and sublimation before you order
How a print feels, how sharp its edges are and how well it covers only becomes clear on the finished print, not on screen. That is why the Sample Pack contains test prints of our products and other prints, so you can feel the differences for yourself before you place your first larger order.
These samples are included
- Test print with DTF standard adhesive
- Test print with DTF Blockout adhesive
- Mini colour chart as a sample
- UV DTF standard print as a sample
- UV DTF print in matt as a sample
- UV DTF print in transparent as a sample
- Sublimation print as a sample
Product information "DTF Transfer Blockout - Single Design"
DTF Transfer Blockout as a single design
Blockout is the DTF version with a special adhesive that holds back dyes from the textile. Here you order a single design and decide the quantity yourself; it is printed in high-resolution four-colour print with opaque white.
What the Blockout adhesive does
With DTF Standard, the adhesive is designed for cotton and cotton blends. Blockout was developed for dyed polyester textiles, where the heat of the press can draw dyes into light areas of the design. This bleeding of the textile colour into your design is known as resublimation. The Blockout adhesive holds back dyes from the textile and significantly reduces this risk. You do not need to set up anything for it in your print file, as the adhesive is already in every transfer. Typical uses are jersey sets and teamwear that always carry the same sponsor logo or club crest.
Quantity and pricing
You upload your design as one file and state how often it should be printed. The sheet builder handles arranging and duplicating on the sheet, so you do not need to worry about print width or sheet length. The price is based on the design area multiplied by the quantity, charged per square metre. All prices are net prices.
Delivery is as one continuous sheet. The copies of your design sit side by side on one sheet; nothing is cut individually. The Pro File Check is not available for this product.
- Blockout adhesive holds back dyes from the textile
- One file with one design, quantity as needed
- Charged per square metre of design area
- From a single piece, no minimum order value
- PDF or PNG with one page, maximum 500 MB
How to set up the print file
Build the design at its actual size, with a transparent background and without bleed, ideally at 300 dpi in CMYK. For the colour profile, we recommend ISO Coated v2 (ECI); lines should be at least 0.4 mm thick, and the design must not be mirrored. You can use gradients within the design, but not gradients that fade out into transparency, because every trace of colour is backed with white.
How to order
First, upload your one-page PDF or PNG, enter the quantity you want and add your selection to the basket. If your PDF has several pages, the upload will not take it, so save each page as a file of its own. If we notice something about the file, you will receive an email and can send the corrected print file by email or via WeTransfer, quoting your order number. Temperature, pressing time and pressure are listed in the heat press settings. We do not offer the Pro File Check for single designs, so your file should be print-ready when you upload it.
| Length (mm): | 1000 |
|---|---|
| Width (mm): | 600 |
Login
